Diesel Centrifugal Pumps Specs & manuals ↓
Atlas Copco PAC F66 KD 74HP FT4 — 6-in Diesel Trash Pump
A 6-inch diesel centrifugal pump with automatic vacuum priming for dewatering and solids-bearing bypass work. The 74-hp Kohler engine drives a closed impeller that passes solids up to three inches. This KD configuration uses an open-frame arrangement. The selected US factory reference is 2021-04.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Atlas Copco
- Model
- PAC F66 KD 74HP FT4 — 2021-04 US reference
Selected factory reference package
- Model
- PAC F66 KD 74HP FT4
- Factory reference
- 2021-04 / Rev.00
- Enclosure
- Open-frame diesel package
- Engine
- Kohler KDI 2504 TCR
- Engine output
- 74 hp
- Engine type
- Turbo common-rail diesel, liquid-cooled with radiator
- Displacement
- 2.5 L / 151 cu in
- Cylinders
- 4
- Maximum operating speed
- 1,800 rpm
- Emissions configuration
- EPA Tier 4 Final
- Starting / electrical system
- Electric start / 12 V
Hydraulics
- Suction / discharge
- 6 in / 6 in flanged
- Maximum capacity
- 2,640 US gal/min
- Maximum head
- 166 ft
- Rating relationship
- Maximum flow and head are separate limits on the factory curve
- Flow at best efficiency
- 2,010 US gal/min
- Maximum pump efficiency
- 79%
- Impeller
- 12-in closed two-vane
- Solids handling
- 3 in
- Curve test basis
- Clean water; UNI EN ISO 9906 level 2B; priming-system and check-valve losses excluded
Priming and materials
- Priming
- Diaphragm vacuum pump; 50 cfm nominal air capacity
- Maximum vacuum
- −26.6 inHg
- Priming drive
- Link belt
- Casing and impeller
- ASTM A536 ductile iron
- Wear ring and plate
- ASTM A48 Class 20 grey iron
- Shaft
- AISI 630 stainless steel
- Mechanical seal
- Silicon carbide / silicon carbide / VITON
- Elastomers
- NBR and VITON
- Check valve
- ASTM A536 ductile iron with NBR flap
- Separator
- Aluminum alloy
Fuel and handling
- Fuel tank capacity
- 90 US gal
- Fuel consumption at best efficiency
- 3.5 US gal/hr at 1,800 rpm; factory operating-point value
- Dry package weight
- 3,470 lb
- Wet package weight
- 4,100 lb
- Frame
- ASTM A36 steel; epoxy powder coating
- Control
- Manual and automatic start-stop with transducers or floats
- Service access
- Hinged pump door and lifting beam
Equipment Details
Capabilities & Features
- Automatic vacuum priming removes air from the suction line.
- Manual and float/transducer-controlled start-stop modes support bypass work.
- A hinged pump door gives service access to the impeller and volute.
Available Options
- FleetLink connectivity option
Specs & Manuals
More in Diesel Centrifugal Pumps
View all →
Atlas Copco PAC F44 KD 49HP FT4 — 4-in Diesel Trash Pump
View details →
Atlas Copco PAC F44 KD-S 49HP FT4 — 4-in Sound-Attenuated Diesel Trash Pump
View details →
Atlas Copco PAC F66 KD-S 74HP FT4 — 6-in Sound-Attenuated Diesel Trash Pump
View details →