Diesel Centrifugal High Head Pumps Specs & manuals ↓
Atlas Copco PAC H63C JD 173HP FT4 — 6 × 3-in Diesel High-Head Pump
A 6-by-3-inch diesel centrifugal pump for high-head dewatering and water transfer. The 173-hp John Deere engine drives a closed impeller that passes solids up to 0.75 inches. This selection uses an open-frame arrangement.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Atlas Copco
- Model
- PAC H63C JD 173HP FT4 — 2022-01 Rev.00
Selected diesel configuration
- Model
- PAC H63C JD 173HP FT4
- Factory reference
- 2022-01 Rev.00
- Engine
- John Deere 4045HFC06
- Manufacturer engine rating
- 173 hp
- Engine type
- Turbo common-rail diesel, liquid-cooled with radiator
- Maximum operating speed
- 2,100 rpm
- Engine emissions
- EPA Tier 4 Final
- Starting / electrical
- Electric start / 12 V
- Enclosure
- Open-frame package
Pump performance
- Suction / discharge
- 6 in / 3 in flanged
- Maximum capacity
- 1,100 US gal/min
- Maximum head
- 460 ft
- Rating relationship
- Maximum flow and head are separate factory curve limits
- Impeller
- 17-in enclosed 4-vane
- Maximum solids
- 0.75 in
- Curve test
- Clean water; UNI EN ISO 9906 level 2; priming-system and check-valve losses excluded
Priming and materials
- Vacuum pump
- Diaphragm
- Nominal air removal
- 50 cfm
- Maximum vacuum
- −26.6 inHg
- Vacuum-pump drive
- Link belt
- Casing
- ASTM A536 ductile iron
- Impeller material
- ASTM A743 CA6NM
- Shaft
- AISI 630 stainless steel
- Mechanical seal faces
- Silicon carbide / silicon carbide
- Elastomers
- VITON
- Check valve
- ASTM A536 ductile iron with NBR flap
- Separator
- Steel
- Wear ring
- ASTM A48 Class 20 cast iron
Fuel, controls and handling
- Fuel capacity
- 173 US gal
- Controller
- PW 1000
- Operating modes
- Manual or automatic start-stop with transducers or floats
- Frame
- ASTM A36 steel; epoxy powder coating
- Handling and service
- Lifting beam and hinged pump access
- Dry package weight
- 7,213 lb
- Wet package weight
- 8,763 lb
Equipment Details
Capabilities & Features
- Automatic vacuum priming removes air from the suction line.
- Float or transducer control supports automatic start-stop operation.
- A hinged access arrangement supports pump maintenance.
Specs & Manuals
More in Diesel Centrifugal High Head Pumps
View all →
Pioneer PP86C21L71-6136CI440 — 8 × 6-in Diesel High-Head Pump
View details →
Pioneer PP128S20L71-6136CI440 — 12 × 8-in Diesel High-Head Pump
View details →
Atlas Copco PAC H108 JD 325HP FT4 — 10 × 8-in Diesel High-Head Pump
View details →