Electric Submersible Pumps Specs & manuals ↓
Atlas Copco WEDA L100N — 6-in Submersible Slurry Pump
A 6-inch electric submersible slurry pump for abrasive media in quarries, dredging and settling ponds. A built-in agitator and chrome-alloy wear components support solids suspension and transfer. The selected 460-volt three-phase 60-hertz motor provides 60 hp output.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Atlas Copco
- Model
- WEDA L100N —460 V /3ph /60Hz
Selected 60 Hz motor
- Supply
- 460 V,3-phase,60 Hz
- Motor output P2
- 45 kW / 60 hp
- Electrical input P1
- 49 kW
- Rated current at460 V
- 76 A
- Shaft speed
- 1,150 rpm
- Starting
- Direct-on-line
- Insulation
- Class H
- Ingress protection
- IP68
- Thermal contacts
- 110°C /230°F
Hydraulics and installation
- Discharge
- 6-in ANSI flange
- Solids passage
- 60 mm / 2.4 in
- Maximum flow
- 2,600 US gal/min; manufacturer US model listing
- Duty curve
- Exact 60 Hz head / flow and power curves in original factory PDF; maximum head and flow are separate limits
- Agitation
- Built-in agitator
- Maximum pumped-liquid temperature
- 95°F /35°C
- Liquid pH
- 4–10; exact-model factory reference sheet
- Maximum immersion depth
- 65 ft
- Minimum immersion
- 59.4 in
- Included cable length
- 65 ft
- Cable size
- 4 ×AWG2
Dimensions and wear components
- Weight excluding cable
- 2,233 lb
- Height
- 63.2 in
- Width
- 36.8 in
- Diameter
- 21.5 in
- Impeller, agitator and wear parts
- Chrome-alloy cast iron
- Outer and stator casing
- Cast-iron alloy
- Shaft
- 39NiCrMo3 or equivalent
- O-rings
- Viton
- Motor-side seal
- WC/WC mechanical seal plus two Buna lip seals
- Impeller-side seals
- Five lip seals:three Buna +two PTFE;one TPU V-ring
- Bearings
- Heavy-duty
Equipment Details
Capabilities & Features
- A built-in agitator lifts settled solids into suspension.
- Chrome-alloy impeller and wear components resist abrasive media.
- Heavy-duty bearings and separate motor-side and impeller-side sealing support slurry operation.
