Electric Piston Wellpoint Pumps

BBA PT150 D185 — 6-in Silent Electric Piston Wellpoint Pump, 10 hp / 50 Hz

A six-inch electric piston pump for wellpoint dewatering with a 10 hp motor and L10-23 silent canopy. The double-acting duplex pump handles water, air or mixtures, with separate maximum ratings of 396 US gpm and 66 ft of head. This configuration uses a 400/690 V, three-phase, 50 Hz supply and has a dry canopy-package weight of 1,385 kg. The factory canopy noise rating is approximately 40 dB at 10 m.

Specs & manuals ↓
Back to Fluid Solutions

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

Specifications

Equipment

Manufacturer
BBA Pumps
Model
PT150 D185, 7.5 kW electric, L10-23 canopy, 50 Hz

Selected electric silent configuration

Manufacturer
BBA Pumps
Pump model
PT150 D185
Drive
Direct Drive Design electric motor
Motor output
7.5 kW / 10 hp
Supply voltage
400/690 V
Frequency
50 Hz
Supply phases
Three-phase star/delta motor
Motor rated speed
1460 rpm
Motor poles
4
Rated current at 400 V
14.5 A
Motor protection
IP55
Motor efficiency
90.7%
Starting
Manual star-delta
Factory plug
Five-pin, 32 A

Wellpoint pumping ratings

Pump construction
Double-acting duplex piston
Maximum flow
90 m³/h / manufacturer 396 US gpm
Maximum head
20 m water column / 66 ft
Maximum suction lift
9.6 m water column / 32 ft
Pump speed
64 strokes per minute, factory standard
Selected connections
6 in; factory also offers 4 in
Rating relationship
Maximum flow, head and suction lift are distinct limits; operating duty depends on the wellpoint installation
Priming
Fully self-priming positive displacement; handles air, water or mixtures
Run-dry capability
Manufacturer permits indefinite dry running
Monitoring
Two vacuum gauges
Stone catcher
Integrated, with three inspection covers

L10-23 silent canopy package

Canopy type
L10-23
Noise, factory canopy rating
Approximately 40 dB at 10 m; sheet does not state A weighting
Dimensions, L × W × H
2270 × 1030 × 1425 mm
Dry package weight
1385 kg; L10-23 canopy configuration
Base frame
Hot-dip galvanized steel
Roof
Composite
Doors
Four lockable composite doors
Lifting
Single lifting point
Forklift handling
Two forklift pockets

Pump wetted construction

Casing
GG20 cast iron
Discharge valve cover
Aluminum
Cylinder liners
Stainless steel, 180 mm diameter
Piston cups
Leather
Piston rods
304 stainless steel
Shaft seal
Gland packing
Valve rubbers
Rubber layer on stainless steel core
Valve seats
Composite; bronze optional

Equipment Details

Capabilities & Features

  • Electric 10 hp drive
  • Double-acting piston wellpoint pumping
  • Silent lockable L10-23 canopy
  • Integrated stone catcher and vacuum gauges

Available Options

  • Matched six-inch connections and wellpoint header
  • Approved 50 Hz supply and star-delta controls
  • Optional bronze valve seats
Become Operational

Need this on a mission profile?

We scope, qualify and deploy the right fleet — managed end to end, tracked on GC.