Industrial Forklifts
Bobcat DV160S-9 Forklift, 36,000 lb, Diesel
High-capacity diesel pneumatic-tire forklift, 36,000 lb rated capacity, wide/double-pneumatic load-center variant for oversized loads.
Rate
Request Pricing
Specifications
3 listed- Rated Capacity
- 36k lb
- Fuel Type
- Diesel
- Tire Type
- Pneumatic
Specifications reflect the equipment class and may vary by unit, configuration and revision. Confirm exact specs for your deployment with dispatch.
Manufacturer Information
- Manufacturer
- Bobcat
- Model
- DV160S-9
- Product Family
- IC Pneumatic Tire Forklifts (High-Capacity Diesel, Wide Load Center)
- Verification
- Verified against official manufacturer source (2026-09-06)
This listing represents an equipment class/model available through ROCK3's supplier network — not a specific physically owned or immediately available unit. Manufacturer data sourced and attributed as shown above.
Full Manufacturer Specifications
Capacity/Reach
- Load Capacity
- 36,000 lb (16,000 kg)
- Load Center
- 48.0 in (1,200 mm) — wide/double-pneumatic load center
- Load Distance (Axle to Fork)
- 38.8 in (985 mm)
Dimensions
- Wheelbase
- 147.6 in (3,750 mm)
- Mast Lowered Height
- 127.8 in (3,245 mm)
- Mast Extended Height
- 185.6 in (4,715 mm)
- Overhead Guard Height
- 112.6 / 117.3 in
- Overall Length
- 342.5 in (8,700 mm)
- Length to Forkface
- 201.4 in (5,115 mm)
- Overall Width
- 73.8 in (1,874 mm)
- Fork Dimensions
- 3.9 x 9.8 x 94.5 in (100x250x2400 mm)
- Ground Clearance Below Mast
- 7.9 in (200 mm)
- Tilt Fwd/Bwd
- 10°/10°
Weight
- Service Weight
- 51,637 lb (23,422 kg)
- Axle Load Loaded (F/R)
- 82,069 / 5,613 lb
- Axle Load Unloaded (F/R)
- 25,091 / 26,590 lb
Powertrain
- Engine
- HDI/DL06-LEF, Tier 4
- Power
- 187.3 hp (139.7 kW) @ 2,100 rpm
- Torque
- 578.6 ft-lb (784.5 N-m) @ 1,400 rpm
- Cylinders/Displacement
- 6 / 5,890 cc
- Fuel Tank Capacity
- 76.6 gal (290 L)
Tires
- Tire Size (F/R)
- 12.00R20
- Tread Front
- 73.1 in (1,858 mm)
- Tread Rear
- 77.8 in (1,976 mm)
Operational data
- Travel Speed Loaded/Unloaded
- 21.1 / 24.2 mph (34/39 km/h)
- Lift Speed Loaded/Unloaded
- 76.8 / 90.5 fpm
- Drawbar Pull
- 26,759 / 26,800 lbf
- Max Gradeability
- 38.1% / 72%
- Service Brake
- Foot/Hydraulic
- Battery
- 24V (12x2) / 100Ah
Additional specifications
- Distinguishing feature
- Same 36,000 lb capacity as D160S-9 but wider load center (48in vs 24in), longer wheelbase (147.6in vs 128.0in) and higher engine output (187.3hp vs 172.6hp) — a genuinely different machine built for oversized/wide loads at the same weight rating, not a duplicate or rename of D160S-9.
Full specification table sourced from the official manufacturer product page and/or spec-sheet PDF linked above, retrieved 2026-09-06. Specifications vary by configuration and revision — confirm exact specs for your deployment with dispatch.
