Manufacturer 30XV series reference photograph — configurations and lengths differ

Air Cooled Chillers

Carrier 30XV-5006MJ0-64C0 — 500-Ton AquaForce Air-Cooled Screw Chiller

Name: Carrier 30XV-5006MJ0-64C0 — 500-Ton AquaForce Air-Cooled Screw Chiller
Brand: Carrier

The Carrier 30XV-5006MJ0-64C0 is a 500-ton nominal AquaForce air-cooled screw chiller in the 500-ton rental equipment class. Its mid (m) configuration uses R-513A refrigerant, E-coated aluminum-fin / copper-tube condenser coils and two variable-speed screw compressors. A heated two-pass flooded evaporator supports 541–2,373 GPM of water flow, with 8 in inlet / 8 in outlet Victaulic connections. Single-point power, a disconnect, control transformer and Touch Pilot remote connectivity are included in the decoded model configuration.

Specs & manuals ↓

Quantity

View rates by

Rate Log in to view pricing

Back to HVAC

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

View quote cart 0

Specifications

Equipment

Manufacturer: Carrier
Model: 30XV-5006MJ0-64C0

Equipment specifications

Manufacturer / family: Carrier AquaForce 30XV with Greenspeed Intelligence
Model / configured suffix: 30XV-5006MJ0-64C0
Nominal manufacturer size: 500 tons
Rental equipment class: 500 tons
Product tier: Mid (M)
Power supply: 460 V / 3-phase / 60 Hz
Chassis length × width × height: 593.7 × 88.0 × 98.9 in
Base operating weight, R-513A table: 29,247 lb; standard 2-pass evaporator and coil trim panels; excludes configured options
Base shipping weight, R-513A table: 28,510 lb; standard 2-pass evaporator and coil trim panels; excludes configured options
Refrigerant: R-513A (condenser code J)
Condenser construction: E-coated aluminum fins / copper tubes (code J)
Compressor type: Semi-hermetic twin rotary screw
Compressor count / circuits: 2 compressors / 2 independent refrigerant circuits
Compressor capacity control: Variable frequency drive
Full-load circuit capacity split, A / B: 50% / 50% (indicative at full load)
Standard-evaporator refrigerant charge, A / B: 569 lb / 582 lb (R-513A, fin/tube configuration)
Evaporator construction: Flooded, 2-pass, with heater (code 0)
Integrated hydronic pump: None (evaporator / hydronic option code 0)
Evaporator net fluid volume: 88 gal
Maximum evaporator water-side pressure: 300 PSIG
Maximum evaporator refrigerant-side pressure: 220 PSIG
Chilled-water connections: 8 in inlet / 8 in outlet; Victaulic
Evaporator drain: 3/8 in NPT
Water flow range, standard 2-pass evaporator: 541–2,373 GPM
Standard entering-water temperature range: 45–70°F
Standard leaving-water temperature range: 40–60°F
Outdoor ambient range, specified fan arrangement: 32–125.6°F without wind baffle; mid-tier configuration
Condenser fan type: Shrouded axial, vertical discharge
Condenser fan quantity: 24 total; circuit A 12 / circuit B 12
Condenser fan control: Variable speed; standard sound
Condenser fan speed: 1,140 rpm maximum
Electrical arrangement: Single-point power, unit disconnect and control transformer (code 4)
SCCR option: Standard SCCR (electrical code 4)
Controls: 7 in Touch Pilot display with remote connectivity (code C)
Service-valve arrangement: Suction service valve and actuated discharge valves (code 6)
Suction piping: Insulated (code 6)
Shipping / enclosure package: Coil-face shipping protection and coil trim panels (code 0)
Maximum condenser airflow, fin/tube coil: 315,360 CFM (manufacturer maximum; variable-speed fan configuration)