Track Excavators Specs & manuals ↓
CASE CX220E Crawler Excavator
The CASE CX220E pairs 162 hp at 1,800 rpm with a 50,000 lb reference operating weight for utility, site-development and general excavation work. Its two main hydraulic pumps deliver 2 × 55.7 gpm at 1,800 rpm, with power-boost pressure available for demanding digging cycles. The 9 ft 8 in arm and 18 ft 8 in boom produce 21 ft 9 in of maximum digging depth and 31 ft 11 in of reach at ground level. These working-range values stay attached to that specific factory setup.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- CASE
- Model
- CX220E
Engine
- Engine
- FPT NEF6 six-cylinder diesel
- Displacement
- 6.728 L
- Net rated power — SAE J1349
- 162 hp at 1,800 rpm
- Net peak torque
- 475 lb-ft at 1,600 rpm
- Emissions
- Tier 4 Final
- Electrical system
- 24 V
- Fuel tank
- 108 gal
Hydraulics & travel
- Main pump output
- 2 × 55.7 gpm at 1,800 rpm
- Boom / arm / bucket pressure
- 4,970 psi
- Power-boost pressure
- 5,410 psi
- Travel speed — low / high
- 2.1 / 3.5 mph
- Swing speed
- 11.5 rpm
- Hydraulic architecture
- Open-center, two variable-displacement axial-piston pumps
Reference working configuration
- Operating weight
- 50,000 lb
- Arm length
- 9 ft 8 in
- Boom length
- 18 ft 8 in
- Maximum digging depth
- 21 ft 9 in
- Maximum reach at ground level
- 31 ft 11 in
- Dump height
- 22 ft 3 in
- Bucket digging force — standard ISO6015
- 31,900 lbf
Equipment Details
Capabilities & Features
- Selectable hydraulic work modes
- Two variable-displacement hydraulic pumps
- Climate-controlled operator cab
- Rear-view camera system
Available Options
- Auxiliary attachment hydraulics
- Machine-control configurations
- Alternative track shoes and guarding
