Drill Press Specs & manuals ↓
CS Unitec MAB 1300 Industrial Four-Gear Magnetic Drill
An industrial magnetic drill for large annular holes, tapping, reaming and countersinking in structural steel. The manual-feed MAB 1300 uses a 20-amp, 110-volt drive with four variable-speed gear ranges, an MT4 spindle and reversible operation. Its factory brochure rates annular cutters up to 5-1/8 inches; the current manufacturer page also specifies a conditional 6-inch capacity through carbon steel up to 1 inch thick with TCT cutters.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- CS Unitec
- Model
- MAB 1300
Drilling & tooling
- Factory brochure annular cutter diameter
- Up to 5-1/8 in with TCT carbide cutters
- Conditional large-diameter capacity
- 6 in through carbon steel up to 1 in thick, TCT cutters; current manufacturer page
- Maximum twist-drill diameter
- 1-3/4 in
- Maximum tapping diameter
- 1-5/8 in
- Maximum reaming diameter
- 2 in
- Maximum countersink diameter
- 3 in
- Gear 1 variable speed
- 30–80 rpm
- Gear 2 variable speed
- 50–120 rpm
- Gear 3 variable speed
- 130–350 rpm
- Gear 4 variable speed
- 210–550 rpm
- Spindle taper
- MT4
- Arbor bore
- 1-1/4 in; 3/4 in adapter included
- Brochure cutter depth
- 1 and 2 in; 3–8 in requires optional ZIA 432 KN adapter
Power & controls
- Supply voltage
- 110 V, 50/60 Hz
- Rated current
- 20 A
- Motor input power
- 2,300 W, operator manual
- Feed
- Manual — MAB 1300
- Direction
- Reversible, clockwise/counterclockwise
- Controls
- Variable speed and torque control
- Lubrication
- Automatic internal lubrication
- Magnetic force indication
- Green/red LED
- Contact monitoring
- Electronic safety shutoff sensor
Dimensions & magnetic base
- Length × width
- 19-1/2 × 10 in
- Height range, factory diagram
- 22.05–34.45 in; current page rounds maximum to 34-1/2 in
- Net weight
- 112 lb
- Stroke with retainer
- 3.35 in
- Travel without retainer
- 12 in
- Magnet base length × width
- 14 × 4-3/4 in
- Magnetic force on 1-inch steel plate
- 23,600 lb
Equipment Details
Capabilities & Features
- Four oil-bath gear ranges with variable speed
- Reversible drive
- MT4 spindle
- Variable torque control
- Automatic internal lubrication
- LED magnetic-force indication
- Electronic safety shutoff sensor
Available Options
- Compatible annular cutters and pilots
- Manufacturer cutting lubricant
- Compatible drill adapters and accessories
