Industrial Forklifts
Industrial Forklift 5,000 lbs, Diesel
Rate
Request Pricing
Specifications
4 listed- Model
- CLARK S25D / KOMATSU FG25T-16 / CATERPILLAR 2C500 / CLARK S25 / DOOSAN G25E-3 G/LP / DOOSAN G25E-5 / DOOSAN G25P-7 / HELI CPQYD25-KU1H
- Weight
- 8.32k lbs
- Max
- 5k
- Lift
- 10' 1
Specifications reflect the equipment class and may vary by unit, configuration and revision. Confirm exact specs for your deployment with dispatch.
Manufacturer Information
- Manufacturer
- Doosan
- Model
- G25E-5
- Product Family
- 5-Series LPG/Gasoline Forklifts (discontinued)
- Verification
- Verified against official manufacturer source (2026-09-06)
This listing represents an equipment class/model available through ROCK3's supplier network — not a specific physically owned or immediately available unit. Manufacturer data sourced and attributed as shown above.
Full Manufacturer Specifications
Capacity/Reach
- Load Capacity
- 5,000 lb (2,500 kg)
- Load Center
- 24 in (500 mm)
Dimensions
- Max Fork Height (std 2-stage mast)
- 127.2 in (3,230 mm)
- Free Lift
- 6 in (152 mm)
- Length to Fork Face
- 102.2 in (2,595 mm)
- Overall Width
- 46.1 in (1,170 mm)
- Mast Lowered Height
- 85.6 in (2,175 mm)
- Mast Extended Height
- 176.8 in (4,490 mm)
- Overhead Guard Height
- 86.0 in (2,183 mm)
- Seat Height
- 40.4 in (1,026 mm)
- Turning Radius (min. outside)
- 89.1 in (2,265 mm)
- Wheelbase
- 64 in (1,625 mm)
- Tilt of Mast (Fwd/Bwd)
- 6°/10°
Weight
- Total Service Weight (Unloaded)
- 8,686 lb (3,940 kg)
- Axle Load Loaded (Front/Rear)
- 12,500 / 1,698 lb
- Axle Load Unloaded (Front/Rear)
- 3,660 / 5,027 lb
Powertrain
- Engine
- Doosan G420FE
- Rated Power (DIN)
- 53 hp (39.5 kW) @ 2,550 rpm
- Cylinders/Displacement
- 4 / 1,975 cc
- Transmission
- Powershift, 1/1 speed
- Battery
- 12V / 45 Ah
Tires
- Tire Size Front
- 7.00x15-12
- Tire Size Rear
- 6.50x10-10
Operational data
- Travel Speed Loaded/Unloaded
- 11.8 / 12.4 mph
- Lifting Speed Loaded/Unloaded
- 100.4 / 118.1 fpm
- Max Gradeability (Loaded @1.0mph)
- 28%
- Brakes
- Foot/Hydraulic (service); Hand/Mechanical (parking)
Additional specifications
- Production window
- Approx. 2007-2017, per independent equipment-spec databases
- Torque field caveat
- Source document's torque value was ambiguous across unit rows (116 ft-lb vs 157 N-m listed in adjacent columns) — reported as-is rather than guessing which is authoritative; flag for a second-source check before treating as final.
Full specification table sourced from the official manufacturer product page and/or spec-sheet PDF linked above, retrieved 2026-09-06. Specifications vary by configuration and revision — confirm exact specs for your deployment with dispatch.
