Central Heating Units Specs & manuals ↓
DryAir 1800 HHP — Tri-Fuel Hydro Heat Pro
The DryAir 1800 HHP Hydro Heat Pro combines a hydronic heater and two fluid-to-fluid plate heat exchangers in a trailer package. Its tri-fuel system uses interchangeable diesel, natural-gas or propane burners. Three pumps circulate the heater fluid and the two separate output circuits, allowing potable and process water to be heated separately or simultaneously. Each exchanger has a published 2-million-BTU/h transfer rating; total heating remains limited by the selected burner’s actual output. A serviceable inlet pre-screen and accessible plate exchangers support maintenance.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- DryAir
- Model
- 1800 HHP — Tri-Fuel Hydro Heat Pro
Equipment specifications
- Diesel heating input
- 1,792,000 BTU/h
- Diesel heating output
- 1,523,000 BTU/h
- Fuel capability
- Diesel, propane or natural gas; burner exchange required
- Plate heat exchangers
- Two serviceable 2-million-BTU/h exchangers
- Electrical supply
- 230 V, single-phase, 60 Hz; two 30-A L14-30 connections
- Manufacturer estimated package weight
- 9,000 lb
- Natural-gas heating input / output
- 1,690,000 / 1,352,000 BTU/h
- Propane heating input / output
- 1,715,000 / 1,372,000 BTU/h
- Maximum diesel consumption
- 12.8 US gal/h
- Maximum natural-gas consumption
- 1,577 cu ft/h
- Maximum propane consumption
- 18.7 US gal/h
- Fluid temperature range
- 130–180°F
- Trailer dimensions, L × W × H
- 212 × 93.5 × 114 in
- Water-heater circulation pump
- 3 HP; 110 US gpm at 30 psi
- Plate-exchanger circulation pumps
- Two; each 3 HP, 110 US gpm at 30 psi
- Total circulation pumps
- Three
- Plate-exchanger arrangement
- Parallel; one potable-water and one process-water circuit
- Plate-exchanger fouling allowance
- 20%
- Heat-transfer fluid
- Non-toxic propylene-glycol/water mixture
- Water heater
- Water-jacket/fire-tube type
- Internal fluid circuit
- Atmospherically vented and low-pressure
- Primary connections
- 2-in Kamlok quick couplers
- Contamination protection
- Serviceable pre-screen upstream of plate exchangers
- Handling
- Standard forklift pockets; optional lifting frame
- System monitoring
- Seven-light system indicators
Equipment Details
Capabilities & Features
- Two separate plate heat exchangers
- Three circulating pumps
- Tri-fuel capability with burner exchange
- Serviceable process-water heat exchanger
- Inlet pre-screen
- Forklift pockets
Available Options
- Bolt-on lifting frame
- Fuel-specific burners
