Dyna-Glo RMC-FA300DGD manufacturer equipment photo

Direct Fired Heaters

Dyna-Glo RMC-FA300DGD — 300,000-BTU/h Propane Construction Heater

Name: Dyna-Glo RMC-FA300DGD — 300,000-BTU/h Propane Construction Heater
Brand: Dyna-Glo

The Dyna-Glo Delux RMC-FA300DGD is a 300,000-BTU/h propane-vapor construction heater with approximately 1,800 cfm of hot-air delivery. Its fan runs from 120-volt power and draws 0.65 amp. Thermostat-controlled interrupted spark ignition manages heat demand, and the manufacturer supplies a 15-foot hose and regulator. The heater includes overheat protection, automatic fuel shutoff, a back-pressure switch and an adjustable discharge angle.

Specs & manuals ↓

Quantity

View rates by

Rate Log in to view pricing

Back to HVAC

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

View quote cart 0

Specifications

Equipment

Manufacturer: Dyna-Glo
Model: RMC-FA300DGD

Equipment specifications

Published heat output: 300,000 BTU/h
Fuel: Propane vapor only
Approximate hot-air output: 1,800 cfm
Electrical supply: 120 V, 60 Hz
Electrical current: 0.65 A
Maximum fuel consumption: 13.9 lb/h
Regulator outlet pressure: 7–10 psig
Minimum regulator supply pressure: 25 psig
Maximum regulator supply pressure: Propane bottle pressure
Motor: 0.085 HP;1,720 rpm
Ignition: Interrupted direct spark; thermostat-controlled
Thermostat range, manufacturer product page: 35–95°F
Included regulator/hose, manufacturer product page: 15 ft
Length × width × height, 2018 French manual: 33.7 × 12.6 × 20.5 in
Heater type: Direct-fired propane construction heater
Safety controls: Overheat shutdown, automatic fuel shutoff and back-pressure switch
Handling: Adjustable heat angle and cord wrap