E-Z Drill 210B — original factory photograph

Drills

E-Z Drill 210B — Single-Gang Concrete Dowel Drill

Name: E-Z Drill 210B — Single-Gang Concrete Dowel Drill
Brand: E-Z Drill

An on-grade pneumatic dowel drill for 5/8- through 2-1/2-inch holes up to 18 inches deep. Adjustable guide wheels, a roller-bearing feed and optional vertical conversion support pavement repairs, lane additions and concrete slab work.

Specs & manuals ↓

Quantity

View rates by

Rate Log in to view pricing

Back to Concrete and Masonry

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

View quote cart 0

Specifications

Equipment

Manufacturer: E-Z Drill
Model: 210B On-Grade

Drilling capacity

Model: 210B On-Grade
Drill arrangement: Single-gang pneumatic dowel drill
Hole diameter: 5/8–2-1/2 in
Standard drilling depth: 18 in
Depth with dust collection kit: 15-3/4 in
Horizontal minimum patch: 48 in with rear wheel removed; hole center 3–12 in below slab top
Patch with dust collection: 51 in with rear wheel removed; hole center 3–12 in below slab top
Distance from corner: 6 in in horizontal position
Horizontal hole center above ground: 3 in
Vertical conversion: Optional conversion kit; hole center up to 12 in from ground

Pneumatic system

Drill motor: Chicago Pneumatic CP 32A
Minimum air supply: 100 CFM
Air with dust collection: 140 CFM minimum
Pressure at drill motor: 90 PSI
Compressor pressure while drilling: 100–110 PSI per operating instructions
Minimum hose inside diameter: 3/4 in
Chuck: 7/8 × 3-1/4 in
Impact energy: 36 ft-lb/blow / 48.8 J
Blow rate: 2200 blows/min
Rotation: 288 RPM

Horizontal dimensions and weights

Length: 52-1/4 in
Length with rear wheel removed: 46-3/4 in
Width: 18-1/4 in
Height: 32 in
Length with dust collection: 54-3/4 in
Height with dust collection: 70-1/2 in
Machine weight: 256 lb
Weight with dust collection kit: 347 lb
Drill motor weight: 54 lb

Equipment Details

Capabilities & Features

Guide wheels support lateral repositioning and jobsite transport.
The pneumatic CP32A percussion drill advances on a roller-bearing feed.
Optional dust collection and vertical-conversion configurations extend the base drill.