Direct Fired Heaters Specs & manuals ↓
Flagro F-1000T — Dual-Fuel Construction Heater
The Flagro F-1000T is a dual-fuel, direct-fired construction heater that operates on propane or natural gas through a fuel-selector valve. Its rated heat input is 1,000,000 BTU/h. A 1-HP fan circulates 7,000 cfm, with direct-spark ignition and thermostat control. The heater uses 115-volt, single-phase power and has a 26-inch air outlet. Factory-listed regulator and hose choices are provided for gas-supply connections.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Flagro
- Model
- F-1000T
Equipment specifications
- Heat input
- 1,000,000 BTU/h
- Fuel
- Propane or natural gas; fuel-selector valve
- Heater type
- Direct-fired construction heater
- Air circulation
- 7,000 cfm
- Electrical supply
- 115 V, single-phase, 60 Hz
- Power requirement, manufacturer sales sheet
- 20 A
- Fan motor
- 1 HP
- Propane consumption, high fire
- 46 lb/h
- Natural gas consumption, high fire
- 952 cu ft/h
- Ignition
- Direct spark
- Thermostat control
- Yes
- Length × width × height
- 61 × 29 × 38 in
- Air outlet diameter
- 26 in
- Weight
- 356 lb
- Maximum inlet pressure, operating manual
- 14 in water column; propane or natural gas
- Vented regulator
- B42R1.25
- Ventless regulator
- 240SDOPCO
- LP/NG hose assembly
- S54180-20; 1.25-in ID MP × MP; 15 ft
- Manufacturer approval
- cULus Listed
- Minimum cylinder size, operating manual
- 100-lb propane capacity; vapor withdrawal
- Ventilation, operating manual
- 1 sq in fresh air per 1,000 BTU/h input
Equipment Details
Capabilities & Features
- Propane/natural-gas fuel selector
- Direct-spark ignition
- Thermostat control
- 1-HP air-circulation fan
- 26-in air outlet
Available Options
- Vented or ventless gas regulator
- Factory LP/NG hose assembly
