Drills and Rotary Hammers Specs & manuals ↓
Trak-Star RailBoss RB2SPD Two-Speed Gas Rail Drill, 1-11/16-Inch Cutter Capacity
The Trak-Star RailBoss RB2SPD, part 0038602, is the explicit preferred gas-powered replacement for the original TRAX 91019 rail-drill entry. Factory cutter tables verify 1-11/16-inch rail drilling with Twister cutter 15354 or carbide cutter 18-15254, preserving the original specialty capacity. Its two-speed gearbox runs at 150 or 350 rpm, with a quill-feed arbor, through-tool coolant and ten-point rail clamp. This is a different selected manufacturer and model; the original quote alias remains attached.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Hougen Manufacturing / Trak-Star
- Model
- RailBoss RB2SPD / 0038602
Exact preferred gas rail drill
- Manufacturer
- Hougen Manufacturing / Trak-Star
- Model
- RailBoss RB2SPD
- Part number
- 0038602
- Power source
- Honda four-stroke gasoline engine
- Engine rating, current manufacturer catalog and HTML
- 2.1 hp
- Engine rating, December 2025 operator feature diagram
- 2.5 hp; differing factory reference retained rather than silently reconciled
- Published weight
- 49 lb / 22.2 kg
- Gearbox speeds
- 150 / 350 rpm
- Low-speed tooling
- Black Twister HSS cutters, 150 rpm
- High-speed tooling
- Carbide Twister cutters, 350 rpm
- Feed
- Manual quill feed; single-stroke ergonomic handle
- Rail clamping
- Ten-point system
Verified 1-11/16-inch rail capability
- Verified supported diameter
- 1-11/16 in / 1.6875 in
- Black cutter part number
- 15354
- Carbide cutter part number
- 18-15254
- Pilot
- 03635
- Standard listed cutter depth
- 7/8 in / 22 mm
- Listed fractional cutter range
- 3/4–1-11/16 in; available table increments vary
- Rail range, operator cover
- 70 lb ASCE to 155 lb PS; matched rail shoes required
- Coolant delivery
- Pressurized bottle; through-tool coolant
- Slug handling
- Positive ejection
- Cutter connection
- Twist arbor for Trak-Star Twister Bits
Configuration and compatible accessories
- Preferred scope
- 0038602 drill; cutters and matched shoes selected separately
- Factory unpacking list
- Hex wrench; clamp knobs/shaft; pilot; feed handle; coolant bottle; engine oil
- Crane rail clamp
- 27557; requires 2 in / 50 mm depth-of-cut Twister Bits
- Girder rail clamp
- 27559
- Bonding retrofit kit
- 05570
- Hole-location template
- Selected to required rail hole spacing
- Engine instructions
- Separate matching Honda engine operating manual referenced by drill operator
Original catalog identity
- Source quote alias
- drill-rail-1-11-16-g-as-trax-91019
- Replacement distinction
- Selected Trak-Star RB2SPD is not claimed to be Racine 910195 / TRAX 91019
- Capacity preservation
- Factory listed 1-11/16-inch cutters establish original rail-drilling capability; no 1-1/2-inch downgrade
Equipment Details
Capabilities & Features
- Two-speed gas-powered rail drilling
- Through-tool coolant
- Quill-feed arbor
- Positive slug ejection
- Ten-point rail clamp
Available Options
- 15354 1-11/16-inch black Twister cutter
- 18-15254 1-11/16-inch carbide Twister cutter
- Matched rail shoes and template
- 27557 crane or 27559 girder rail clamp
