Hydraulic Submersible Power Packs and Pumps Specs & manuals ↓
Hydra-Tech S6T — 6-in Hydraulic Submersible Pump
A 6-inch hydraulically driven submersible pump for solids-laden water, sewage and slurry. A heat-treated aluminum body, variable-speed hydraulic drive and recessed connections support dewatering and pipeline bypass work.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Hydra-Tech
- Model
- S6T — aluminum body
Pump and dimensions
- Discharge
- 6-in NPT(F)
- Inlet flange
- 6-in 125# ASA
- Solids handling
- 5 in without strainer; 2.5 in with strainer
- Selected body
- Heat-treated aluminum
- Weight
- 202 lb
- Height
- 48 in
- Width at widest point
- 25 in
- Impeller
- Stainless-steel recessed vortex
- Shutoff head
- Up to 120 ft; not at maximum flow
Hydraulic drive
- Hydraulic input flow maximum
- 30 US gal/min
- Hydraulic operating pressure maximum
- 3,000 psi
- Hydraulic source
- Open-center hydraulic system
- Hydraulic hose ports
- 1-in (-16) SAE
- Drive
- Variable-speed hydraulic motor
- Standard elastomers
- Buna N
- Standard shaft seal
- Carbon / ceramic; silicon carbide optional
- Performance basis
- Water at 60°F; select duty from the original factory curves on PDF page2
Construction and use
- Shaft
- Stainless steel
- Application
- Sewer bypass, sludge and debris-laden water; pipeline booster use
- Seals
- Oil-lubricated
- Pump installation
- Submersible; may also be bolted into a pipeline
- Wear ring and wear plate
- Stainless steel
- Alternative body
- S6TDI ductile iron, 330 lb; not the selected 202-lb S6T
Equipment Details
Capabilities & Features
- Hydraulic variable-speed operation allows output to be matched to the duty.
- Large solids passage supports wastewater and slurry service.
- The pump can be used submerged or connected into a pipeline.
