Backhoe and Skip Loaders
JCB 3CX-14 (Fixed Dipper) Backhoe Loader
The 3CX-14 fixed-dipper backhoe uses a 74 gross hp JCB EcoMAX diesel and a variable-flow, closed-center hydraulic circuit. Its standard fixed arm digs 14 feet 7 inches deep and reaches 17 feet 10 inches from the swing pivot. The GP loader bucket lifts 7,670 lb at full height; the heavier 6-in-1 shovel has a separately published lift rating. Four-wheel drive and a 4F/4R Power Shuttle transmission support site transport and loading. The manufacturer sheet distinguishes this 74 hp base model from the higher-powered SUPER and 4CX variants.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- JCB
- Model
- 3CX-14 (Fixed Dipper)
Engine & hydraulics
- Engine
- JCB EcoMAX turbocharged/intercooled diesel
- Emissions
- Tier 4 Final / Stage IV
- Displacement
- 4.4 L
- Cylinders
- 4
- Gross power
- 74 hp
- Net power
- 71 hp
- Maximum torque
- 295 lb-ft at 1,200 rpm
- Fuel tank
- 40 gal
- Hydraulic pump output
- 44 gpm
- Hydraulic relief pressure
- 3,655 psi
- Hydraulic circuit
- Closed center, variable flow
Fixed-dipper backhoe
- Maximum SAE dig depth
- 14 ft 7 in
- Two-foot flat-bottom depth
- 14 ft 5 in
- Reach from swing pivot
- 17 ft 10 in
- Reach from rear axle centerline
- 21 ft 9 in
- Maximum backhoe operating height
- 17 ft 8 in
- Backhoe loading height
- 11 ft 2 in
- Backhoe loading reach
- 5 ft 6 in
- Swing arc
- 180°
- Bucket rotation — maximum rotation position
- 201°
- Bucket breakout force
- 13,730 lbf
- Dipper tearout force
- 7,110 lbf
Loader reference buckets
- GP bucket breakout force
- 13,603 lbf
- GP lift capacity at full height
- 7,670 lb
- 6-in-1 bucket breakout force
- 14,398 lbf
- 6-in-1 lift capacity at full height
- 7,119 lb
- Loader hinge-pin height
- 11 ft 4 in
- Loader dump height
- 9 ft
Fixed-dipper chassis reference
- Base weight — canopy, 6-in-1 shovel, 24-in bucket, full fuel and operator
- 16,191 lb
- Transport length
- 23 ft 7 in
- Transport height — fixed dipper
- 11 ft 3 in
- Height to cab / canopy top
- 9 ft 3 in
- Width with bucket
- 7 ft 9 in
- Mainframe ground clearance
- 1 ft 1 in
- Transmission
- 4F / 4R manual with Power Shuttle
- Drive
- 4WD
Equipment Details
Capabilities & Features
- Fixed-dipper backhoe
- Variable-flow closed-center hydraulics
- Four-wheel drive
- Power Shuttle transmission
- Parallel-lift loader geometry
Available Options
- 6-in-1 loader shovel
- Cab enclosure
- Backhoe and loader attachment options
- Hand-held tool hydraulic circuit
