Engine Driven Welders Specs & manuals ↓
Lincoln Electric Dual Maverick 200/200X K4382-1
A diesel-powered dual-operator welder/generator with two independent welding outputs and separate digital controls. Each output delivers 200 A at 28 V at 60% duty or 170 A continuously; single mode delivers up to 450 A at 60% duty. The Kubota D902 engine also supplies 10 kW of single-phase auxiliary power, with variable-speed operation and automatic stop/start.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Lincoln Electric
- Model
- Dual Maverick 200/200X K4382-1
Dual-operator welding
- Product number
- K4382-1
- Welding operators
- 2 independent outputs from one engine
- Dual-mode IEC rated output, per output
- 200 A at 28 V, 60% duty
- Dual-mode continuous output, per output
- 170 A at 26.8 V, 100% duty
- Dual-mode maximum output, per output
- 225 A at 24.5 V, 60% duty
- Dual-mode CC range
- 30–225 A
- Dual-mode CV current range, current manual
- 30–220 A
- Dual-mode TIG range, current manual
- 20–255 A
Single-operator welding
- Single-mode IEC rated output
- 335 A at 33.4 V, 60% duty
- Single-mode continuous output
- 290 A at 31.6 V, 100% duty
- Single-mode maximum output
- 450 A at 24.5 V, 60% duty
- Single-mode CC range
- 50–450 A
- Single-mode CV current range, current manual
- 30–370 A
- Single-mode TIG range
- 20–255 A
- Duty-cycle rating ambient
- 104°F / 40°C; listed 60% ratings allow 100% below 91°F /33°C
- Maximum open-circuit voltage, current manual
- 80 V at 3,600 rpm
Generator & controls
- Auxiliary output
- 10,000 W, 240 V,60 Hz, single phase
- 120 V output circuits
- 2 ×2,400 W
- Simultaneous welding / generator use
- Available auxiliary power decreases while welding
- User interface
- Two 4.3-inch colour LCD screens, IP67 rated
- Remote capability
- CrossLinc with compatible accessory
- Engine management
- Variable engine speed and automatic stop / start
- Welding processes
- Stick, TIG, MIG, flux-cored, carbon gouging
Engine & handling
- Fuel
- Diesel
- Engine
- Kubota D902, Tier 4 Final
- Rated engine power
- 24.8 hp /18.5 kW at 3,600 rpm
- Displacement
- 0.898 L /54.8 cu in
- Engine configuration
- Three-cylinder, water cooled
- High idle /full load /low idle
- 3,600 /3,600 /2,500 rpm
- Fuel capacity
- 20 US gal /75.7 L
- Engine oil capacity
- 0.97 US gal /3.7 L
- Dry cooling system capacity
- 0.9 US gal /3.3 L
- H × W × D, current manual
- 36.1 ×27.0 ×65.0 in
- Net weight
- 1,160 lb /526 kg
- Starting
- 12 V battery and starter
Equipment Details
Capabilities & Features
- Two independent welding outputs
- Two 4.3-inch LCD screens
- CrossLinc remote capability
- Variable engine speed
- Automatic stop/start
- 10 kW single-phase generator
Available Options
- Compatible wire feeder or CrossLinc remote
- Spool gun
- TIG torch / shielding-gas equipment
- Trailer and running gear
- Gouging torch
