Engine Driven Welders Specs & manuals ↓
Lincoln Electric Frontier 500X K5350-2
A 500 A continuous-duty Kubota diesel welder/generator with 20 kW continuous three-phase auxiliary power. The Frontier 500X combines CC/CV welding, downhill pipe, TIG and carbon-arc gouging with a 7-inch digital interface, CrossLinc remote control and automatic stop/start. Its factory K5350-2 technical manual specifies the 48.9 hp turbocharged Kubota V2403 engine.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Lincoln Electric
- Model
- Frontier 500X K5350-2
Welding output
- Product number
- K5350-2
- Rated continuous output
- 500 A at 40 V DC, 100% duty
- Output rating ambient
- 104°F / 40°C
- Stick range
- 30–525 A
- Pipe range
- 30–400 A
- DC TIG range
- 5–410 A
- CV wire / spool-gun / submerged-arc range
- 10–45 V
- Gouging range
- 60–525 A
- Open-circuit voltage
- 60 V DC average / 71 V peak at 1,800 rpm
Generator & controls
- Single-phase continuous / peak power
- 12,000 / 15,000 W
- Three-phase continuous / peak power, IM10670-A
- 20,000 / 20,500 W
- Generator voltage / frequency
- 120/240 V, 60 Hz
- 120 V outlets
- Two GFCI-protected NEMA 5-20R duplex receptacles, 20 A breakers
- Single-phase full-output outlet
- NEMA 14-50R, 50 A breaker
- Three-phase outlet
- 240 V NEMA 15-50R, 50 A breaker
- Simultaneous welding / generator use
- Available auxiliary power decreases while welding
- Display
- 7-inch graphical interface with memory / PIN access
- Remote capability
- CrossLinc / True Voltage Technology with compatible accessory
- Idle management
- Auto-Stop/Start
Engine & handling
- Fuel
- Diesel
- Engine
- Kubota V2403-CR-TE4-BG, Tier 4 Final
- Rated power, current manual
- 48.9 hp / 36.5 kW
- Engine configuration
- Four-cylinder, turbocharged, water cooled
- Displacement
- 2.43 L / 148.5 cu in
- High idle / full-load / low idle speed
- 1,800 / 1,800 / 1,500 rpm
- Fuel capacity
- 20 US gal / 75.7 L
- Engine oil capacity
- 10 qt / 9.5 L
- Cooling capacity
- 9 qt / 8.5 L
- H × W × D, enclosure / including doors
- 40.42 × 28.38 × 65.00 in
- Exhaust height allowance
- Add 8.46 in above enclosure
- Approximate weight without fuel
- 1,462 lb / 663 kg
- Ingress rating
- IP23S, current operator manual
- Starting
- 12 V battery / starter, Group 31 / 1,000 CCA
Equipment Details
Capabilities & Features
- 500 A / 40 V continuous welding
- 20 kW continuous three-phase generator
- 7-inch digital interface
- CrossLinc / TVT remote capability
- Automatic stop/start
- Mechanized welding accessory readiness
Available Options
- Compatible wire feeder / spool gun
- CrossLinc or wireless remote
- ArcLink connector kit for mechanized communications
- TIG torch / shielding-gas equipment
- Trailer / undercarriage
