Engine Driven Welders Specs & manuals ↓
Lincoln Electric Ranger 260MPX K3458-1
A gasoline-powered multiprocess welder/generator with a digital interface, CrossLinc remote adjustment and 9.5 kW of continuous single-phase AC power. Its published maximum welding rating is 260 A at 26 V continuously; IEC process ratings are listed separately. The compact 446 lb machine supports stick, Touch Start TIG and compatible wire-feed setups.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Lincoln Electric
- Model
- Ranger 260MPX K3458-1
Selected model & rated output
- Product number
- K3458-1
- Fuel
- Gasoline
- Maximum welding rating
- 260 A at 26 V, 100% duty
- IEC stick continuous range
- 35 A / 21.4 V to 231 A / 29.2 V
- IEC TIG continuous range
- 25 A / 11 V to 260 A / 20.4 V
- IEC MIG / FCAW continuous range
- 35 A / 15.8 V to 253 A / 26.7 V
- Maximum OCV, stick / wire
- 85 V
- Maximum OCV, TIG
- 24 V
- Output rating ambient
- 104°F / 40°C
Generator & controls
- Continuous generator output
- 9,500 W
- Peak generator output
- 10,000 W
- Generator voltage / phase / frequency
- 120/240 V AC / single phase / 60 Hz
- Generator total harmonic distortion
- 5%, manufacturer stated
- Weld setup
- Ready.Set.Weld
- Remote technology
- CrossLinc, compatible accessory required
- Interface
- Digital screen / push-and-turn control
- Engine service
- Maintenance alerts
Engine configuration
- Manufacturer product-page engine
- Kohler / Rehlko CH730, 23.5 hp
- Earlier code 12646 engine in current manual
- CH740, 25 hp
Engine & handling
- Fuel capacity
- 11 US gal / 41.6 L gasoline
- Engine displacement
- 44.2 cu in / 724 cc
- Engine full-load / idle speed
- 3,600 / 2,500 rpm
- Fuel delivery
- Electric lift pump and carburetor
- Lubrication
- Full pressure with full-flow filter
- Engine protection
- Low-oil-pressure switch
- Net weight without fuel
- 446 lb / 202 kg
- Weight with full fuel tank
- Approximately 515 lb / 234 kg
- Nominal body H × W × D
- 26 × 20 × 36 in
- Maximum height, current dimension drawing
- 28.96 in
- Continuous operating angle
- 15° maximum
- Enclosure rating
- IP23
- Operating temperature
- 14–104°F / −10–40°C
Equipment Details
Capabilities & Features
- Digital push-and-turn interface
- Ready.Set.Weld setup guidance
- CrossLinc remote capability
- Clean AC generator power
- Maintenance alerts
- Compact galvanized-base design
Available Options
- CrossLinc remote
- Compatible wire feeder and welding gun
- TIG torch and gas equipment
- Factory or all-terrain undercarriage
- Cover / rotatable exhaust kit
