Engine Driven Welders Specs & manuals ↓
Lincoln Electric Ranger 330MPX K3459-1
A carbureted gasoline welder/generator for stick, downhill pipe, TIG, wire welding and carbon-arc gouging. It delivers a published maximum 330 A at 28 V continuously and 10 kW of continuous single-phase AC power. The digital interface combines Ready.Set.Weld setup, ArcFX visualization and CrossLinc remote capability; this K3459-1 configuration is distinct from the EFI model.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Lincoln Electric
- Model
- Ranger 330MPX K3459-1
Selected model & rated output
- Product number
- K3459-1
- Fuel / engine configuration
- Gasoline / carbureted
- Maximum welding rating
- 330 A at 28 V, 100% duty
- IEC stick / pipe continuous range
- 35 A / 21.4 V to 292 A / 31.7 V
- IEC TIG continuous range
- 25 A / 11 V to 325 A / 23 V
- IEC MIG / FCAW continuous range
- 35 A / 15.8 V to 312 A / 29.6 V
- Carbon-arc gouging maximum rating
- 330 A at 28 V, 100% duty
- Carbon electrode capacity
- Up to 3/16 in
- Maximum OCV, stick / pipe / wire / gouging
- 85 V
- Maximum OCV, TIG
- 24 V
- Output rating ambient
- 104°F / 40°C
Generator & controls
- Continuous generator output
- 10,000 W
- Peak generator output
- 11,500 W
- Generator voltage / phase / frequency
- 120/240 V AC / single phase / 60 Hz
- Generator total harmonic distortion
- 5%, manufacturer stated
- Weld setup / visualization
- Ready.Set.Weld / ArcFX
- Remote technology
- CrossLinc, compatible accessory required
- Direct-connect spool gun
- Compatible Magnum PRO 250 LX GT, separate
- Engine service
- Maintenance alerts
Engine configuration
- Engine
- Kohler / Rehlko CH740
- Rated engine power
- 25 hp
- EFI version
- K4779-1 — separate configuration
Engine & handling
- Fuel capacity
- 11 US gal / 41.6 L gasoline
- Engine displacement
- 44.2 cu in / 724 cc
- Engine full-load / idle speed
- 3,600 / 2,500 rpm
- Fuel delivery
- Electric lift pump and carburetor
- Lubrication
- Full pressure with full-flow filter
- Engine protection
- Low-oil-pressure switch
- Net weight without fuel
- 446 lb / 202 kg
- Weight with full fuel tank
- Approximately 515 lb / 234 kg
- Nominal body H × W × D
- 26 × 20 × 36 in
- Maximum height, current dimension drawing
- 28.96 in
- Continuous operating angle
- 15° maximum
- Enclosure rating
- IP23
- Operating temperature
- 14–104°F / −10–40°C
Equipment Details
Capabilities & Features
- 330 A / 28 V continuous welding rating
- Downhill pipe mode
- Carbon-arc gouging capability
- Ready.Set.Weld / ArcFX
- CrossLinc remote capability
- Direct-connect spool-gun readiness
Available Options
- Compatible spool gun or wire feeder
- CrossLinc remote
- TIG torch / shielding-gas equipment
- Carbon-arc torch and compressed-air supply
- Factory or all-terrain undercarriage
