Plasma Cutters Specs & manuals ↓
Lincoln Electric Tomahawk 1000 K2808-1
A 60 A plasma-cutting and gouging system with a 25 ft LC65 hand torch. The K2808-1 package accepts single- or three-phase input, with continuous 40 A output. The published code-12850 manual rates 60 A at 50% duty on the listed 208–460 V services and 40% duty at 575 V. Mild-steel cut ratings distinguish ¾ in recommended cutting, 1 in maximum cutting and 1¼ in severance.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Lincoln Electric
- Model
- Tomahawk 1000 K2808-1
Selected package & cutting
- Product number
- K2808-1
- Electrical table represented
- Operator manual code 12850
- Torch
- LC65 hand torch, 25 ft lead
- Output range
- 20–60 A
- Recommended mild-steel cutting
- ¾ in at 19 in/min
- Maximum mild-steel cutting
- 1 in at 10 in/min
- Mild-steel severance
- 1¼ in at 5 in/min
- Processes
- Plasma cutting / gouging / expanded-metal cutting
Code 12850 electrical ratings
- Input frequency
- 50/60 Hz
- Single-phase rated input entries
- 208 / 230 V AC
- Three-phase rated input entries
- 208 / 230 / 460 / 575 V AC
- Continuous output
- 40 A at 96 V DC, 100% duty
- 60 A duty, listed 208–460 V inputs
- 50% at 104 V DC
- 60 A duty, 575 V three phase
- 40% at 104 V DC
- Input at 208 V single phase / 60 A output
- 38 A
- Input at 230 V single phase / 60 A output
- 34 A
- Input at 230 V three phase / 60 A output
- 21 A
- Input at 460 V three phase / 60 A output
- 9 A
- Input at 575 V three phase / 60 A output
- 8 A
- Maximum open-circuit voltage
- 270 V DC
- Pilot current
- 20 A
Gas & controls
- Gas inlet pressure
- 87–109 psi
- Gas flow point
- 275 scfh at 80 psi
- Gas type
- Clean compressed air or nitrogen
- Starting method
- Touch start, without high frequency
- Controls
- Cutting / grid / gouging mode selection
- Consumable detection
- Parts-in-Place
- Operating temperature
- 14–104°F / −10–40°C
Equipment Details
Capabilities & Features
- PowerConnect input adaptation
- Touch-start arc initiation
- Rapid arc restrike
- Parts-in-Place protection
- Front pressure gauge and regulator
Available Options
- LC65 replacement cutting and gouging consumables
- Compatible machine torch configuration
- K2886-1 circle-cutting guide
- Air filtration accessories
