Makita EK8100 — original manufacturer model photograph

Saws and Grinders

Makita EK8100 — 16-in Gasoline Power Cutter

Name: Makita EK8100 — 16-in Gasoline Power Cutter
Brand: Makita

An 81-cc, 16-in gasoline power cutter with a cutting depth up to 5-3/4 in. The EK8100 combines a 5.6-hp engine, five-stage air filtration and an installed water-feed kit. Its cutting arm changes between center and outboard positions for work close to curbs, walls and ground-level edges.

Specs & manuals ↓

Quantity

View rates by

Rate Log in to view pricing

Back to Concrete and Masonry

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

View quote cart 0

Specifications

Equipment

Manufacturer: Makita
Model: EK8100 — 16-in US configuration

Cutting performance

Model: EK8100
Maximum wheel diameter: 16 in
Maximum cutting depth: 5-3/4 in
Maximum wheel-spindle speed: 3,820 RPM
Arbor: 20 mm; 1-in adapter available
Maximum composite-wheel thickness: 0.2 in
Cutting-arm position: Center or outboard for adjacent-edge cuts

Gasoline engine

Displacement: 81 cc / 4.9 cu in
Factory maximum power: 5.6 hp / 4.2 kW
Power-rating engine speed: 9,150 RPM; original operator-manual rating
Maximum torque: 5.0 N·m
Engine no-load speed class: 9,350 RPM; separate from wheel-spindle speed
Idle speed: 2,500 RPM
Clutch engagement speed: 3,800 RPM
Fuel/oil mixture: 50:1
Fuel tank capacity: 37 fl oz / 1.1 L
Ignition: Electronic with speed limitation

Handling and water

Factory flyer dry weight: 23.3 lb
Manual weight configuration: Empty tank and no cutting disc
Water feed: Factory-fitted water kit
Air filtration: Five-stage foam, paper and nylon system
Starting controls: Single-lever on/off/choke and decompression valve
Vibration isolation: Four rubber engine mounts and two mass-dampening systems
Optional transport system: DT2010 dolly with water tank