Direct Fired Heaters Specs & manuals ↓
Master MH-80T-KFA — 80,000-BTU/h Liquid-Fuel Heater
The Master MH-80T-KFA is an 80,000-BTU/h portable forced-air heater with thermostat control and a 5-gallon onboard fuel tank. It uses 1-K kerosene or the manufacturer’s listed diesel, fuel-oil and aviation-fuel substitutes. A built-in air-pressure gauge and fuel gauge support routine checks, while electronic ignition and flame-out protection manage burner operation. The heater runs from 120-volt, single-phase power and consumes 0.63 gallons per hour at its published rating.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Master
- Model
- MH-80T-KFA
Equipment specifications
- Published heat rating
- 80,000 BTU/h / 23.4 kW
- Recommended fuel
- 1-K kerosene
- Approved substitute fuels
- No.1/No.2 diesel or fuel oil; Jet A; JP-8
- Electrical supply
- 120 VAC, 60 Hz, single-phase
- Operating current
- 1.5 A
- Fuel tank capacity
- 5 US gal
- Fuel consumption
- 0.63 US gal/h
- Air-pump pressure
- 3.8 psi
- Heat control
- Thermostat
- Heater type
- Direct-fired forced-air construction heater
- Ignition
- Electronic spark ignition
- Flame protection
- Flame-out fuel shutoff
- Combustible clearance, top / sides / front
- 4 / 4 / 8 ft
- Fuel monitoring
- Built-in fuel gauge
- Service instrumentation
- Built-in air-pressure gauge
- Construction
- Steel body
- Ductwork
- Not permitted at front or rear
- External fuel tank
- Not permitted
Equipment Details
Capabilities & Features
- Thermostat control
- Onboard fuel tank
- Fuel gauge
- Air-pressure gauge
- Flame-out protection
- Portable carry handle
- Steel construction
