Direct Fired Heaters Specs & manuals ↓
Mr. Heater MH210KTR — 210,000-BTU/h Liquid-Fuel Heater
The Mr. Heater MH210KTR is a 210,000-BTU/h direct-fired construction heater with an onboard liquid-fuel tank and thermostat control. The manufacturer’s 2018 operating specification gives a 1.6-gallon-per-hour fuel rate, 13.5-gallon tank capacity and 115-volt electrical input. Continuous direct-spark ignition, a photo CAD cell, a high-limit switch and LED diagnostics monitor burner operation. A wheeled frame and tubular handles support movement around the work area. The documented fuel choices include kerosene, diesel, fuel oil and JP-8/Jet A.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Mr. Heater
- Model
- MH210KTR
Equipment specifications
- Fuel burn rate, 2018 manual
- 210,000 BTU/h / 61.5 kW
- Recommended fuel, 2018 manual
- No.1-K kerosene
- Factory-tested fuels, 2018 manual
- Kerosene, No.1/No.2 diesel or fuel oil, JP-8/Jet A
- Electrical input, 2018 manual
- 115 V, 60 Hz, 5.5 A
- Fuel rate, 2018 manual
- 1.6 US gal/h
- Tank capacity, 2018 manual
- 13.5 US gal
- Required line protection
- 20 A
- Minimum operating voltage
- 110 V
- Air-pump pressure setting
- 8.4 psig
- Maximum outlet temperature
- 1,450°F
- Ignition
- Continuous direct spark
- Spark generator
- 13 kV, 10 mA
- Primary safety control
- Solid-state control
- Flame monitoring
- Photo CAD cell
- Diagnostics
- Control board with flashing LED status indicator
- Controls
- Factory thermostat and on/off switch
- Combustible clearance, outlet
- 8 ft
- Combustible clearance, top / sides / inlet
- 3 / 3 / 3 ft
- Transport
- Wheeled frame and tubular steel handles
Equipment Details
Capabilities & Features
- Factory thermostat
- Photo CAD-cell flame monitoring
- High-limit safety switch
- Continuous ignition
- LED diagnostic control
- Wheeled transport frame
- Tubular handles
