Rental Vehicles
Ram 3500 Flatbed — Gasoline 4x4
A 14,000 lb GVWR dual-rear-wheel 3500 regular-cab chassis paired with the Knapheide PVMX-95 pine-floor platform. The 9-foot-5-inch open deck provides side and rear loading access; gasoline power and 4x4 drive are listed separately.
The body manufacturer’s application table matches this platform to the selected cab-to-axle and dual-rear-wheel chassis. A flat loading deck and reinforced stake pockets support equipment and material transport. Gasoline and diesel variants use the chassis-cab engine ratings rather than the higher pickup ratings.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Ram
- Model
- 2026 3500 Regular Cab Gasoline 4x4 / Knapheide PVMX-95
Chassis configuration
- Model year
- 2026
- Cab / rear wheels
- Regular Cab / dual rear wheels
- Drive
- 4x4
- Selected GVWR
- 14,000 lb
- Fuel
- Gasoline
- Engine
- 6.4 L HEMI V8
- Engine power
- 375 hp
- Engine torque
- 429 lb-ft
- Transmission
- TorqueFlite HD / ZF PowerLine 8AP430 eight-speed automatic
- Axle ratio
- 4.10
- Wheelbase
- 143.5 in
- Cab to rear axle
- 60 in
- Front bench seating
- Up to 3 people
- Rating basis
- Cab-chassis GVWR; completed body, accessories, occupants and cargo share this limit
Platform body
- Manufacturer
- Knapheide
- Model
- PVMX-95
- Actual platform length
- 9 ft 5 in
- Actual platform width
- 95.75 in
- Factory chassis application
- Dual rear wheels; 60 in cab-to-axle
- Selected floor
- 2 in pine
- Published bare platform net weight
- 636 lb
- Platform weight scope
- Body only; bulkhead, hitch, storage and installation equipment additional
- Long sills
- 5 in
- Cross members
- Formed 11-gauge high-strength steel, 50,000 psi
- Cross-member spacing
- 18 in centers
- Side and end rails
- Formed 12-gauge high-strength steel, 50,000 psi
- Stake pockets
- Reinforced, sized for 2×4 lumber
- Lighting
- Recessed LED RID lights
- Finish
- Electrodeposition primer, oven-cured finish and underside coating
Equipment Details
Capabilities & Features
- The body manufacturer’s application table matches this platform to the selected cab-to-axle and dual-rear-wheel chassis.
- A flat loading deck and reinforced stake pockets support equipment and material transport.
- Gasoline and diesel variants use the chassis-cab engine ratings rather than the higher pickup ratings.
Available Options
- Steel or treadplate floor variants
- Bulkhead styles
- Stake racks and removable side sections
- Underbody storage
- Cargo tie-down rails
- Receiver hitch
