SLIC12R-MS with heat — manufacturer photograph from the exact 460 V data sheet

Air Conditioners — Industrial

Smart Family SLIC12R-MS — 12-Ton 460 V Industrial AC with Heat

The Smart Family SLIC12R-MS combines twelve-ton-class industrial cooling with 16 kW of electric heat and a dedicated dehumidification mode. The documented 460-volt three-phase configuration delivers 4,000 CFM of rated recirculated cooling airflow through twin 12-inch supply and return connections. Its 35-inch cabinet width, VFD blower, condensate pump and galvanized lifting frame suit temporary ducted installations.

Specs & manuals ↓

Quantity

View rates by

Rate Log in to view pricing

Back to HVAC

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

View quote cart 0

Specifications

Equipment

Manufacturer: Smart Family of Cooling Products
Model: SLIC12R-MS with heat

Equipment specifications

Nominal cooling class: 12 ton
Electric heating circuit: 16 kW
Electrical supply: 460 V / 3 phase / 60 Hz
Cooling current at 460 V: 28.7 A
Minimum circuit ampacity, with heat: 57 A
Maximum fuse size, with heat: 63 A
Generator size, manufacturer data sheet: 31 kW
Dimensions, length × width × height: 95.5 × 35 × 75.625 in
Shipping weight, 2021 heated configuration: 2,200 lb
Rated cooling airflow, recirculated air: 4,000 CFM
Airflow adjustment range: 1,500–4,500 CFM
Evaporator supply connections: 2 × 12 in
Evaporator return connections: 2 × 12 in
Condenser supply connection: 1 × 20 in
Electrical connection: Single-point Series 16 Cam-Lok
Evaporator blower motor: 5 hp / 4 kW TEFC
Evaporator fan: Single direct-drive plenum fan
Condenser fans: Twin direct-drive plenum fans; manufacturer 5 hp motor specification
Compressor: Single Copeland scroll
Filter: 2 in washable media
Blower control: VFD with speed potentiometer, inline starter and bypass
Operating modes: Cooling, heating, dehumidification and fan
Dehumidification heat: 16 kW finned tubular electric reheat
Cooling / heating control reference: Selectable entering-air or leaving-air temperature
Compressor / heater control modes: Off, local, hand or remote
Condenser fan modes: Normal or quiet
Condensate management: Installed condensate pump; stainless steel drain pan
Coil finish: Hydrophilic-coated condenser and evaporator fins
Rental frame: Hot-dipped galvanized tubular frame with fork pockets, tie-downs and lift rings
Air connection closures: Factory-installed supply and return duct doors
Certification: ETL; UL 1995 / CSA 236 STD 22.2