Electric Centrifugal High Head Pumps Specs & manuals ↓
Atlas Copco PAC H108 E 350HP SS — 10 × 8-in Electric High-Head Trash Pump
A 10-by-8-inch vacuum-primed electric centrifugal pump for dewatering and bypass applications with solids up to 3.5 inches. The 350-hp, 460-volt three-phase package uses the factory stainless material option for wetted components. This listing identifies the 2022-01 US factory reference configuration.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- Atlas Copco
- Model
- PAC H108 E 350HP SS — 2022-01 US reference
Selected factory reference configuration
- Model
- PAC H108 E 350HP SS
- Reference-sheet revision
- 2022-01 / Rev.00; selected US package specification
- Rated motor output
- 350 hp
- Supply
- 460 V, 3-phase, 60 Hz
- Motor
- WEG four-pole three-phase induction; IC411 TEFC
- Rated motor current
- 384 A
- Motor efficiency class
- W22 NEMA premium efficiency
- Suction / discharge
- 10 in / 8 in flanged
- Package dry weight
- 7,352 lb; factory reference value, material-option-specific weight not separately listed
Hydraulic performance
- Maximum capacity
- 6,400 US gal/min
- Maximum head
- 360 ft
- Rating relationship
- Maximum flow and maximum head are separate curve limits
- Flow at best efficiency
- 4,270 US gal/min
- Maximum pump efficiency
- 82%
- Impeller
- 17-in closed two-vane
- Maximum solids
- 3.5 in
- Curve test basis
- Clean water; factory UNI EN ISO 9906 test; priming-system and check-valve losses excluded
Priming and handling
- Automatic priming
- Diaphragm vacuum pump and air separator
- Nominal vacuum-pump air capacity
- 50 cfm
- Maximum vacuum
- −26.6 inHg
- Vacuum-pump drive
- Link belt
- Frame
- ASTM A36 steel, epoxy powder coating
- Handling
- Lifting beam and forklift pockets
- Service access
- Hinged door to pump and impeller
Selected materials
- Casing
- CD4MCu duplex stainless steel
- Impeller material
- CD4MCu duplex stainless steel
- Wear ring
- PTFE
- Wear plate
- AISI 316L stainless steel
- Shaft
- AISI 630 stainless steel
- Seal faces
- Silicon carbide / silicon carbide
- Elastomers
- VITON
- Check valve
- AISI 316 stainless steel with VITON flap
- Separator
- AISI 316 stainless steel
Equipment Details
Capabilities & Features
- Automatic vacuum priming removes air from the suction line.
- A closed two-vane impeller passes suspended solids.
- Lifting and forklift provisions support movement of the skid package.
Specs & Manuals
More in Electric Centrifugal High Head Pumps
View all →
Atlas Copco PAC H64 E 350HP — 6 × 4-in Electric High-Head Trash Pump
View details →
Atlas Copco PAC H64 E 350HP SS — 6 × 4-in Electric High-Head Trash Pump
View details →
Atlas Copco PAC H108 E 350HP — 10 × 8-in Electric High-Head Trash Pump
View details →