Atlas Copco PAC H64 E 350HP family — indicative factory reference photograph; material option not visually certified

Electric Centrifugal High Head Pumps

Atlas Copco PAC H64 E 350HP SS — 6 × 4-in Electric High-Head Trash Pump

Name: Atlas Copco PAC H64 E 350HP SS — 6 × 4-in Electric High-Head Trash Pump
Brand: Atlas Copco

A 6-by-4-inch vacuum-primed electric centrifugal pump for dewatering and bypass applications with solids up to 3 inches. The 350-hp, 460-volt three-phase package uses the factory stainless material option for wetted components. This listing identifies the 2022-01 US factory reference configuration.

Specs & manuals ↓

Quantity

View rates by

Rate Log in to view pricing

Back to Fluid Solutions

Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.

View quote cart 0

Specifications

Equipment

Manufacturer: Atlas Copco
Model: PAC H64 E 350HP SS — 2022-01 US reference

Selected factory reference configuration

Model: PAC H64 E 350HP SS
Reference-sheet revision: 2022-01 / Rev.00; selected US package specification
Rated motor output: 350 hp
Supply: 460 V, 3-phase, 60 Hz
Motor: WEG four-pole three-phase induction; IC411 TEFC
Rated motor current: 384 A
Motor efficiency class: W22 NEMA premium efficiency
Suction / discharge: 6 in / 4 in flanged
Package dry weight: 6,724 lb; factory reference value, material-option-specific weight not separately listed

Hydraulic performance

Maximum capacity: 1,900 US gal/min
Maximum head: 380 ft
Rating relationship: Maximum flow and maximum head are separate curve limits
Maximum pump efficiency: 69%
Impeller: 17-in closed two-vane
Maximum solids: 3 in
Curve test basis: Clean water; factory UNI EN ISO 9906 test; priming-system and check-valve losses excluded
Selected hydraulic limits: 1,900 US gal/min / 380 ft from factory cover; nominal 1,800-rpm curve. Higher-speed curves are separate operating points.