Crawler Dozers Specs & manuals ↓
John Deere 550 P-Tier Crawler Dozer
The 550 P-Tier is a 92 hp hydrostatic crawler dozer for earthmoving, finish grading and site preparation. Its dual-path drive controls each track independently for power turns and counter-rotation. The standard 18-in grouser / PAT reference configuration weighs 18,853 lb and carries a 105 in blade rated at 2.4 cu yd. The manufacturer publishes separate low-ground-pressure and attachment configurations, with different ground pressures, blade widths and operating weights. Grade-control packages extend the machine from manual blade operation to assisted grading.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- John Deere
- Model
- 550 P-Tier
Engine & service
- Engine
- John Deere PowerTech™ PWS 4045
- Emissions standard
- EPA Final Tier 4/EU Stage V
- Engine displacement
- 4.5L (276 cu. in.)
- SAE net rated power
- 69 kW (92 hp) at 2,000 rpm
- Aspiration
- Turbocharged with charge-air cooler
- Fuel tank
- 202 L (53.45 gal.)
Hydraulics & drive
- Drive
- Dual-path hydrostatic with independently controlled tracks
- Implement hydraulic flow — unloaded high idle
- 71.5 L/m (19 gpm)
- Steering
- Single-lever speed, direction and counter-rotation
- Travel speed — forward / reverse
- 5.0 mph
Reference undercarriage & blade
- Reference configuration
- standard 18-in grouser / PAT
- Base operating weight — ROPS, full fuel and 175-lb operator
- 18,853 lb
- Blade width
- 105 in
- SAE blade capacity
- 2.4 cu yd
- Track length on ground
- 2184 mm (86 in.)
- Ground pressure
- 44.1 kPa (6.4 psi)
- Grouser width
- 457 mm (18 in.)
- Ground clearance
- 345 mm (13.6 in.)
- Overall length
- 4022 mm (13 ft. 2 in.)
- Blade lift height
- 732 mm (28.8 in.)
- Blade digging depth
- 579 mm (22.8 in.)
- Blade height
- 955 mm (3 ft. 2 in.)
Equipment Details
Capabilities & Features
- Dual-path hydrostatic drive
- Single-lever steering and counter-rotation
- Power-angle-tilt blade configuration
- ROPS / FOPS operator protection
Available Options
- Low-ground-pressure undercarriage
- SmartGrade integrated 3D machine control
- Electrohydraulic blade controls
- Slope-control and laser packages
- Rear ripper or winch configurations
