Crawler Dozers Specs & manuals ↓
John Deere 700 P-Tier Crawler Dozer
The 700 P-Tier is a 135 hp hydrostatic crawler dozer for earthmoving, finish grading and site preparation. Its dual-path drive controls each track independently for power turns and counter-rotation. The XLT standard 22-in grouser / 121-in PAT reference configuration weighs 30,900 lb and carries a 121 in blade rated at 4.4 cu yd. The manufacturer publishes separate low-ground-pressure and attachment configurations, with different ground pressures, blade widths and operating weights. Grade-control packages extend the machine from manual blade operation to assisted grading.
Estimated equipment rental only. Delivery, taxes and applicable fees quoted separately. Final pricing confirmed with dispatch.
Specifications
Equipment
- Manufacturer
- John Deere
- Model
- 700 P-Tier
Engine & service
- Engine
- John Deere PowerTech™ PVS 6068
- Emissions standard
- EPA Final Tier 4/EU Stage V
- Engine displacement
- 6.8L (414 cu. in.)
- SAE net rated power
- 101 kW (135 hp) at 1,800 rpm
- Aspiration
- Turbocharged with charge-air cooler
- Fuel tank
- 262 L (69.2 gal.)
Hydraulics & drive
- Drive
- Dual-path hydrostatic with independently controlled tracks
- Implement hydraulic flow — unloaded high idle
- 95 L/m (25 gpm)
- Steering
- Single-lever speed, direction and counter-rotation
- Travel speed — forward / reverse
- 5.5 mph
Reference undercarriage & blade
- Reference configuration
- XLT standard 22-in grouser / 121-in PAT
- Base operating weight — ROPS, full fuel and 175-lb operator
- 30,900 lb
- Blade width
- 121 in
- SAE blade capacity
- 4.4 cu yd
- Track length on ground
- 2615 mm (103 in.)
- Ground pressure
- 42.2 kPa (6.12 psi)
- Grouser width
- 559 mm (22 in.)
- Ground clearance
- 387 mm (15.2 in.)
- Overall length
- 4906 mm (193 in.) (16 ft. 1 in.)
- Blade lift height
- 977 mm (38 in.) (3 ft. 2 in.)
- Blade digging depth
- 536 mm (21 in.)
- Blade height
- 1322 mm (52 in.) (4 ft. 4 in.)
Equipment Details
Capabilities & Features
- Dual-path hydrostatic drive
- Single-lever steering and counter-rotation
- Power-angle-tilt blade configuration
- ROPS / FOPS operator protection
Available Options
- Low-ground-pressure undercarriage
- SmartGrade integrated 3D machine control
- Electrohydraulic blade controls
- Slope-control and laser packages
- Rear ripper or winch configurations
